• Luosi Metal
  • 126

Knowledge of stainless steel rivets

Knowledge of stainless steel rivets

     Rivets are another sided riveting rivets, riveting, hand percussion hammer nails exposed rivet head movements, so that end with the nail head flush to complete the riveting operation, very convenient, especially for the inconvenience using ordinary rivets (to be carried out from both sides of riveting) or rivets (the lack of riveters) riveting occasions. Application of the core is usually riveted round head hit, countersunk head rivets needed for a smooth surface riveting occasions.

      Rivet riveting machine is mainly used for signs, equipment, and other top plate. Rivets are used in a class of single-sided riveting rivets, but have to use special tools - pull rivet gun (manual, electric, of the action) for riveting. Especially suitable for this type of rivet rivet inconvenience the ordinary (to be riveting from both sides of) the riveting occasions, it is widely used in construction, automotive, ship, aircraft, machinery, appliances, furniture and other products. Among them, the opening round head rivets type most widely used head rivets needed for a smooth riveting performance occasions, closed rivets with the higher requirements for loading and sealing performance of the riveting certain occasions.

      Flat head, oval head rivet is mainly used for sheet metal or leather, canvas, wood and other non-metallic materials, riveting occasions. Mainly used for large flat head rivet riveting non-metallic materials occasions. Empty heart rivets are mainly used with the load is not riveting occasions. Headless rivet riveting mainly used where non-metallic materials. Light weight hollow rivet, nail head is weak, with the load for much of the non-metallic materials riveting occasions. Tubular rivets are not used for non-metallic materials with the load riveting occasions. Rivet riveting machine is mainly used for signs, equipment, etc. on.

    Round head rivets are mainly used with large lateral loads riveting occasions, the most widely used. Cone head rivets the nail head mast, the ability of corrosion, commonly used in the hull, boilers, tanks and other corrosion strong riveting occasions. Head, 1200 rivets are mainly used surface shall be smooth, with little load riveting occasions. Countersunk head, countersunk head rivet 1200 is mainly used for surface shall be smooth, with little load riveting occasions. Flat head, oval head rivet is mainly used for sheet metal or leather, canvas, wood and other non-metallic materials, riveting occasions.

    Rivet is riveted, the use of its own deformation or interference connection is riveting piece parts. Many types of rivets, and informal. Commonly used round head, flat head, countersunk head rivets, blind rivets, hollow rivets, these are usually connected using its deformation is riveting pieces. (Generally less than 8 mm cold riveting, larger than the hot riveting.) But there are exceptions, such as tricyclic locked plate, is the use of rivets and the lock hole riveting amount of interference. There are also on the insert rivets, special. Divided into two parts, a thick rod cap center hole, a cap with the smaller rod is

our news

Related information

Luosi

[email protected]
86-769-83370993
cuntou industrial district,hengli town

Newsletter