Stainless steel screw

Stainless steel screw hotline

Guide:

Luosi Metal >> News >> SOCKET HEAD SHOULDER SCREWS

SOCKET HEAD SHOULDER SCREWS


Description:The socket head shoulder screws/stripper bolts (also sometimes called Shoulder Bolts) are ground to very close tolerances, with a thick shoulder usually running 80 percent of the length of the shaft. The shafts of other models may have a longer threa..

SOCKET HEAD SHOULDER SCREWS (STRIPPER BOLTS, SHOULDER BOLTS)
The socket head shoulder screws/stripper bolts (also sometimes called Shoulder Bolts) are ground to very close tolerances, with a thick shoulder usually running 80 percent of the length of the shaft. The shafts of other models may have a longer threaded section. In measuring the socket head shoulder screw/stripper bolt, it is the diameter and length of its shoulder that determines its size. The socket head shoulder screw/stripper bolt does not have a point.

The length of the socket head shoulder screw/stripper bolt is determined by (and varies by) length of the shoulder, rather than total length of the part or its shaft.

The socket head is a recessed head in which the sides of the recess are parallel to the body axis, into which a wrench fits. Hence, it is also known as an "internal wrenching head."

Socket head shoulder screws/stripper bolts are used in applications requiring low limited clearance, where parts may not be thick enough to be counterbored, and/or where loading capacity is not critical. The socket head shoulder screw/stripper bolt may also replace more expensive parts such as trunion mountings, shafts, or guides.

 

 

keywords:SOCKET SHOULDER SCREWS


Prev: SQUARE NUTS

Next: SOCKET SET SCREWS

Copyright © 2018 www.dgluosi.com Dongguan Luosi Screw Co.,Ltd.东莞网站设计