Stainless steel screw in the cleaning process

Stainless steel screw in the cleaning process

Stainless steel screw in the cleaning process

Use: Stainless steel screws Cleaner
Using the ratio :2-4kg cleaning agent / 100kg Screw

Usage:
1. Cleaning 303,304,316 stainless steel screws, directly to the syrup into the grinding machine in grinding with stainless steel screws with screws. Until cleaned, and are generally required 3-30 minutes (depending on oil level date).
2. Cleaning stainless steel screws screws 667,201,202,418, etc.; the syrup into the grinding machine, grinding together with screws, stainless steel screws to be black after 5-10 minutes of grinding, and to add a small amount of the cleaning agent so that the screw back to white (check the cleaner 0.5-1kg and add 3-5 times after the water absorbed into the ground against the machine) can be stopped after the screw back white ground, and clean water. Can then process the next one - → polishing

Note:
1. Operation must wear rubber gloves and protect Japanese mirror.
2. If not careful sputtering in the skin, immediately rinse with water.